- Features & Benefits
Material strengthSelf supporting corrosion-resistant extruded Aluminium section, assembled with shock resistant fibreglass reinforced Polyamide PA6 corners ideally suited for general ventilation applications.
Motor performanceThree phase multi-voltage IP55 TEFC motor, wound for either (Delta) 230V/3Ph/50Hz or (Star) 400V/3Ph/50Hz connection, which is mounted using a unique low loss X-frame internal mounting arrangement, improving performance, and reducing noise generation, suitable for speed control with the Eltadrive VSD range of frequency inverter controls. Motors are pre-wired to an IP55 terminal box mounted on the side, for easy customer connection.
Quality Impeller DesignHigh efficiency backward curved impellers with non-overloading power characteristics.
ChoiceStraight through airflow as supplied. Discharge position can be altered on site.
Quality assuranceAll QUBe units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2: 1985 (sound performance).
Ease of installationAll models are designed for direct connection to standard diameter flexible or rigid circular ducting with 50mm long spigots for ease of connection. Each spigot has an integral E PDM (Ethylene Propylene), UV + Ozone stable and resistant rubber seal which has a U shaped profile.
Full accessory rangeFlexible connectors, attenuators, Eltadrive VSD frequency inverter controls, Eltadrive VSD frequency inverters (1Ph and 3Ph supply).
CasingConstructed from self supporting corrosion-resistant extruded aluminium section. Straight through airflow as supplied. Discharge position can be altered on site. The inlet and outlet panels incorporate circular spigots with integral U-shaped ozone and UV stable EPDM rubber seals to prevent duct leakage. Assembled with shock resistant fibreglass reinforced Polyamide PA6 corners, and 25mm thick double skinned removable panels, manufactured from pre-galvanised steel, in-filled with a non flammable mineral wool, 60kg/m³, thereby minimising breakout noise.
MotorsThree phase multi-voltage IP55 TEFC Foot / Flange mounted IEC frame motors, wound for either (Delta) 230V/3Ph/50Hz or (Star) at 400V/3Ph/50Hz connection, suitable for speed control when used with the Eltadrive VSD range of frequency inverter controls. Motors are pre-wired to an IP55 terminal box mounted on the side, for easy customer connection.
ImpellersA high efficiency backward curved welded steel impeller with a nonoverloading power characteristic, finished with a powder coating to RAL 5002 for greater surface protection, and dynamically balanced to G2.5 / G6.3 according to ISO1940 part 1.
Quality ManagementUnits are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SQU units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance).
- Flexible Connections
- Matching Flanges
- Transition Piece
- Weather Hood