Heritage SCHT

More Views

Heritage SCHT Roof Mounted Vertical Discharge Centrifugal Fan
Elta Select Product

Quick Facts

  • 5 standard sizes from 400mm to 630mm.
  • Air volume flow rates up to 4.172 m³/s.
  • Static pressures up to 1000 Pa.
  • Suitable for operating temperatures up to +50°C.
  • Can be mounted at angles up to 15°.
  • Available in AC.

Delivery

  • Available for next day delivery with Elta Select
Applications
Features & Benefits

Material strength

The all metal cowls have a robust, long lasting construction, manufactured from galvanised steel and powder coated after forming.

Impeller design

Aerodynamically designed backward curved centrifugal impellers in either sheet steel or aluminium dependant upon impeller selection.

Tested to the very latest standards

SCHT units are tested to ISO 5801:1997 (airside performance) and to BS 848 Pt 2:1985 (sound performance) meaning accurate, up to date information on performance and noise data that can be relied upon.

Quality assurance

All units are designed and manufactured with procedures as defined in BS EN ISO 9001: 2008.

Easy cleaning

The wind band is held in place with toggle clamps to permit easy access for cleaning and maintenance when the units are installed in atmospheres that are dirt laden.

High temperature

With motors out of the air stream, the SCHT is suitable for a wide range of applications from contaminated air to elevated temperatures.

Reliability

Motors have sealed for life bearings.
Specification

Casing

The all metal cowls shall provide a long lasting and robust construction, manufactured from pressed galvanised sheet steel and powder coated after forming. The wind band shall incorporate toggle clamps to provide easy access for cleaning and maintenance. All SCHT units can be mounted at angles up to 15°.

Motors

Motors are to be foot mounted totally enclosed metric type to IP55, with sealed for life bearings, standard industrial paint finish and Class F insulation to EN 60034-5, suitable for operating temperatures up to +50°C. Motors are to be wired via a weatherproofed cable to an IP55 protected terminal box.

Impellers

Aerodynamically designed backward curved centrifugal impellers constructed in aluminium or galvanised sheet steel. Impellers are balanced to ISO 14694 Grade G6.3.

Quality Management

Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SCHT units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance).
Accessories
  • InverterInverter
Downloads