- Features & Benefits
EfficiencyThe advanced engineering and design provides higher efficiency with lower power absorption characteristics, which improves quality and life expectancy.
Quality Impeller DesignAdjustable pitch aerodynamic impellers allow easy site adjustment of the impeller from factory set maximum pitch angles if required.
SafetyAll motors are fitted with integral ‘Thermal overload protection’ preventing the motor from overheating and all fans come with an integral motor side guard.
Solid ConstructionThe powder coated steel fan plate incorporates a pressed inlet which provides extra rigidity, smoother airflow and enhanced performance characteristics. Finish is pastel beige (RAL 7032).
AdaptableCompact SCP fans operate as Form A running, but are available as Form B if required, so the fan can be used for supply as well as extract.
Speed ControllableEach fan is fully speed controllable with an electronic or transformer controller, which means airflow can be altered to suit site conditions.
Quality AssuranceAll units are designed and manufactured with procedures as defined in BS EN ISO 9001: 2008.
SpecificationThe Compact SCP range of plate mounted axial fans as manufactured by Elta Fans Ltd. 46 Third Avenue, Pensnett Trading Estate, Kingswinford, West Midlands, DY6 7US, UK. Tel: +44 (0) 1384 275800 - If you need more information - Contact us.
CasingThe all metal fan casing and guard provide a long lasting and robust construction. The units have been constructed from mild steel and suitably treated to ensure full corrosion protection. The guard shall be bright zinc plated. Fan plates and motors shall have a powder coated polyester epoxy paint finish in pastel beige (RAL 7032).
MotorsThree phase multi-voltage motors are wound for either (Delta) 230V/3Ph/50Hz or (Star) 400V/3Ph/50Hz connection, suitable for speed control when used with the Eltadrive VSD range of frequency inverter controls.
Fans are suitable for operating temperatures between -20°C and +70°C fixed speed and -20°C and +50°C when used with a speed controller. Electrical connection to the motor shall be provided by an IP55 terminal box fitted to a 550mm long flying lead.
ImpellersAdjustable pitch aerofoil impellers are provided with blades made from high quality GRP. Impellers are factory set at an angle to provide maximum performance. The hubs are manufactured from die cast aluminium alloy (LM24). Assembled impellers are to be dynamically balanced to ISO 14694 Grade G6.3.
Quality ManagementUnits are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SCP units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance).
- Electronic Controller
- Electronic Controller
- Impeller Side Guard
- Louvre Shutter
- Transformer Controller
- Wall Cowl